View Suitable Products
Static mixers are used for the continuous mixing of fluid and gas into water streams. Softerwater manufacture a range of 316SS inline plate static mixers significantly reducing the time required for the mixing process. Areas of high and low pressure are generated throughout each chamber in the static mixer creating intense turbulence resulting in a thorough mix of fluid or gasses injected into the system.
Softerwater static mixers comprise a range of models to suit any flow range between 1.08 m3/hr (18 l/min) through to 540 m3/hr (9000 l/min). We can custom manufacture a static mixer to meet your requirements and specifications.
Softerwater static mixers can be supplied with or without injection modules.
Injection Module Options
Fluid and gasses injection into the injection module is by either a chemical pump or a gas pump. The pump needs to be sized correctly so that the pressure of the fluid or gas being injected is greater than the pressure of the water carrying system.
Inline Port Module
Diffuser Probe Module
Diffuser Ring Module
Static Mixer Module
Using only 316SS headers/flanges, housings and mixing plates Softerwater’s static mixers can be manufactured to meet your specific requirements.
Bubble Mixer Plate
Installing a bubble mixer plate in the static plates breaks up the turbulent flow further mixing the fluid or gas with the water stream. Fluid or gas passed over the bubble mixer is further thoroughly mixed in several turbulent chambers before passing through the system. Consider adding 1 or more bubble mixer plates to your static mixer design.
Injecting Into Hard Water Is Costing You Money
Hard water is classified as water containing high levels of minerals like calcium and magnesium which not only don’t mix well with fluids and gasses that you are injecting. Left untreated the calcium and magnesium scale will cause premature failure of components and equipment in the water carrying system costing you money in replacement parts, labour and down time.
Consider installing a Softerwater catalytic water conditioner as a pre-treatment to the static mixer. Any fluid or gas being injected into the water stream will mix more thoroughly with a softened water giving you a better result.
Softerwater custom manufactures an inline combination water conditioner, injection port and static mixer to suit your requirements.